|
|
Joined: May 2011
Posts: 37
Member
|
OP
Member
Joined: May 2011
Posts: 37 |
I've recently been working on a CICS system. I defaulted the system to remove the old customer DB. Then programed for the CO's and keymaps. Now the Flash mail is not communicating with the System. I've not found any thing in the installation manual about adding the Flash to the system. This is a used system and was already wired with the flash connected to the seventh port of the system. Is there some programming I'm not seeing that now needs to be done to get them to talk. The system and flash have both been reset several times.
ballen
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,284
Posts638,772
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Carl Navarro),
133
guests, and
284
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|