|
|
Joined: Sep 2007
Posts: 2
Member
|
OP
Member
Joined: Sep 2007
Posts: 2 |
Hello, I was just given responsibility for making some changes to a Panasonic VB42050 KSU. I am fairly new to programming phone systems so please bear with me. I started out with no manuals or information about the system. Through this message board I was able to find a manual but I am still running into problems getting to programming mode.
According to the DBS 824 manual I should be able to enter programming mode by pressing XXXXXXXX from the attendant phone (Extension 100). All extensions on the system are set to automatically pick up an outside line. When I try the above procedure the standard "invalid phone number" message starts playing and the display does not show "Program Mode" the way I would expect after reading the manual. Is there a different procedure to enter programming mode when the system automatically picks up an outside line?
Thanks for your help!
Edited by: rich30529 Edited for content.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,290
Posts638,801
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
120
guests, and
196
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|