Just installed a KX-TA824 last night. It was replacing a KX-T61610 so everything was pre-wired. Thought this woud be an easy switch with just some light programming.

No such luck! Problem is that when the DSS buttons are programmed on the KX-T7030 phones, several of the DSS buttons light up until the call is answered.

The system has extensions X101 to X112 plus X116. The only DSS extension buttons that work right are X101, X103, X106, and X107. This is happening on all extensions. In other word, any DSS button on any phone will light up on an incoming call if that button is assigned to X102, X104, X105, X108, X109, X110, X116.

I have disconnected all extension but X101 from the PBX and still get the same problem. If I clear all of the DSS buttons, they do not light up with an incoming call. If I flip X103 and X104 buttons the problem follows the X104 assignment.

I was hoping to get this up and running this weekend, but my suppliers tech is out until Monday. Any help would be appreciated.

Thx

KX-TA824 + 3x8 board + doorphone card