|
|
Joined: Feb 2005
Posts: 21
Member
|
OP
Member
Joined: Feb 2005
Posts: 21 |
We are working on checking the cable wiring. The MIM card is in the top location on the card, we have not moved it from when the system was delivered to us. Our phone thinks the wiring is correct, but he doesn't have a manual, he is working off the manual from our current Version 6 system.
I noticed that on the IVM software screen, there is a status screen that says VMI Application Cards (Y/N) and it say "N" even though the software shows the card install on the same page. Also on that page is where is says Connectivity "None".
Do you have any information the correct wiring for this system, mainly the cables out of the computer and in to the wiring block.
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,299
Posts638,872
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
111
guests, and
321
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|