Hello All! Your forum has been invaluable for me in programming a toshiba dk280 that I relocated for a client. I just have one last thing to finish for this move, that is to install a full voice t1 for the client to use as a group 9 dial out.
I have never installed a t1 before, and was hoping someone can tell me if i have missed out on doing anything, before the cut with AT&T this evening. AT&T was quite rude about making this the last call before they drop the order, since i've been trying to figure out the t1 requirements at my end, and the first 2 times we scheduled the cut, it didnt work.
I have mapped all 24 channels for the dsx1 on the adtran tsu600 (csu), using network for timing, using an rdtu1 card on a ba bb cpu, b8zs and esf for framing on adtran, are there any other things i should be aware of before i call ATT to make the cut?
Please hlp, the client wont be happy if ATT drops the order.
Thanks a ton.
PS> please be gentle, As you might have guessed, i am a complete newbie in the field.
------------------
