atcomsystems.ca/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems RightFax w/ CTX670

Here's how it is done. This is a doc from Castelle who makes the Faxpress which is basically the same as what you've got. I've done this scenario personally and it works good. Don't mid the date, it all applies. Basically you hook it up to analog ports on the Toshiba set as vm ports(so they can receive dtmf integration strings)and route the did's using that...


HOWTO: Integrate Toshiba DK 424i Series PBX To FaxPress

Document ID: HT



This article applies to the following:

Product(s): SBE/2500/5000/7000

Last Revised: 03/14/2001

Last Reviewed:

DISCUSSION

FaxPress will connect to Toshiba analog ports that are to be programmed somewhat like analog voice mail ports.



First connect the FaxPress to analog station ports and program these ports into a distributed hunt group using program *40. Also program the class of service for each port using program 31. Make sure that the FaxPress ports are in their own “VM Group” in the class of service we suggest; group 2, which is LED 06. Enable “Receive VM ID code” LED 16, “End/End Signal Rev (VM) “ LED 17 and “Executive & Privacy Override Blocking” LED 18. Make sure all other Class of Service LED’s are off.



Second use program 17 to specify routing per programs 71 and 72. Light LED 05 for each DID line to activate this service.



Third using program 71create a DNIS digit conversion and routing table for each DID having a FaxPress Box. This program will allow you to assign a unique DTMF digit string to each DID number (7-14) and terminate directly to the FaxPress pilot (71-1, 71-2, 71-3).



Additional query words: PBX, Toshiba, dk, 280

Keywords :
Version :
Platform :
Issue type : kbhowto

DISCLAIMER

The Origin of this information may be internal or external to Castelle. Castelle makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Castelle makes no explicit or implied claims to the validity of this information. Castelle reserves the right to change, without notice, product offerings or specifications and the information in this document.



Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.