|
|
Joined: Mar 2004
Posts: 880 Likes: 1
Member
|
OP
Member
Joined: Mar 2004
Posts: 880 Likes: 1 |
Long day, but in the end I got it all working. Here is what I did wrong...
I forgot about setting the bank of 4 dipswitches to 1&2 On and 3&4 Off on the T1/PRI combo card when using as PRI.
The T1/PRI card worked fine in Cabinet 1 as currently poplulated. Had to set the LMU1 switch in Cabinet 0 to down position (PRI). Mandatory when installing T1/PRI combo in cabinet other than 0.
No clocking wires needed for Point-to-point. Just set Hub to clock off and Node to clock on.
When networking systems with a Telco point-to-point, the hub definately needs a T1 cross-over cable between it and the CSU/Telco. The node is straight-thru.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,290
Posts638,802
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
1 members (jsaad),
133
guests, and
405
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|