|
|
Joined: Jun 2005
Posts: 64
Member
|
OP
Member
Joined: Jun 2005
Posts: 64 |
Has anyone encountered a system lockup with the Vodavi Mach 1 system. I have a Vodavi Mach 1 system ver. 3.09 with about 15 active phones and a 4 port Vodavi Talk Path voicemail system. In the last couple of months I have had the system lockup where all of the phones are displaying the time apparently when the system froze, some of the CO buttons along with certain DSS buttons are lit as well, same buttons on everyones phone. None of the buttons on the phones will work and if you reset an individual phone it will only come up showing the ver number of the system and never initialize. When plugging into one of the RS232 ports on the bottom of the KSU you cannot enter program mode, hitting the enter key does nothing. Once a hard reset is performed on the cabinets, this has an expansion cabinet, then everything starts working again, any suggestions on what might be causing this problem would be appreciated, thanks in advance.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,295
Posts638,839
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
3 members (ALB300, Xdm, justbill),
192
guests, and
315
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|