How to: Program PRT Clock Slip timing?|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Re: How to: Program PRT Clock Slip timing? #226175 08/04/04 10:33 PM
Joined: Jun 2004 Posts: 77 Calgary, Alberta, Canada new2nec Member
new2nec Member Joined: Jun 2004 Posts: 77 Calgary, Alberta, Canada	Quote <font face="Verdana, Arial" size="2">Originally posted by ClassOfService: Ok, I found it... It's memory block 1-8-33: 8.3.11 Master Clock Selection (Memory Block 1-8-33) Use this Memory Block to assign the source for synchronization of the clocking for DTI-U10/20/30, PRT(1)-U10/20, or BRT(4)-U10 ETU. Default: 0 (Not assigned) Related Programming: Memory Block 7-1: Card Interface Slot Assignment Once you've got the proper configuration setup modem connections via CoSession should work flawlessly! </font> Thanks for reminding me of this setting. Our PRI system was having a lot of trouble pumping data through the channels (running some fax servers through the PRI). Our modems were having problem connecting and finishing transfers, but after setting this MB, it worked flawlessly. Thanks again.

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Entire Thread
Subject	Posted By	Posted
How to: Program PRT Clock Slip timing?	ClassOfService	08/03/04 02:27 PM
Re: How to: Program PRT Clock Slip timing?	DrPbx	08/03/04 03:50 PM
Re: How to: Program PRT Clock Slip timing?	ClassOfService	08/03/04 05:00 PM
Re: How to: Program PRT Clock Slip timing?	new2nec	08/05/04 02:33 AM

Moderated by ttech

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems NEC Telephones & Systems How to: Program PRT Clock Slip timing?