from ext 100
feature hold #0*

press linekey #7 (clear buttons are the line keys. goes 1-4 on top row, then 5-8 the next etc)

press linekey #1

display will show:
1 01:something here -??

the 1st number is the cabinet
the 01 wll be the slot number
the something will be the card type
the ?? will be the beginning port number

write all of that down.
hit transfer

display will be the same except the 01 will be 02:and the something may be another type of card or it might not.

write this one down

keep hiting transfer and going thru all of the combinations & writing them all down.

post the results and i'll help you with the next step

speaker will get you out of programming

[This message has been edited by chrislebeck (edited September 24, 2004).]