here's what i think you can do:

use the page out on the ecr card (the rca jack labeled cn3. should be the bottom rca jack)

use the relay #1 contacts to close the relay on the anti-feedback amp

use code 56 to do the page (which should energize the relay on the ecr card while paging and open the relay when you hang up and end the page)

i'm not really sure how all of this connects up to whatever hardware you've got. so this might not work.
===========================================
i'm guessing you might still be using the external page built into the ipk cabinet instead of the page out on the ecr card.

to program on a button. the button needs to be a feature access,
press feature
redial
button
1
56
feature


[This message has been edited by chrislebeck (edited November 04, 2004).]