IVS 2000 - How do I set up a ring group for ICM calls from a door phone|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Re: IVS 2000 - How do I set up a ring group for ICM calls from a door phone #227458 03/11/05 04:09 PM
Joined: Feb 2005 Posts: 5 Australia dassa Member
dassa Member Joined: Feb 2005 Posts: 5 Australia	sounds like the best thing to do is set the reception phone and the other two phones to have the extension in question as a line appearance in cmd 90. set the reception phone to immediate ring (default) and for the other two, set it up to delayed ring (9003). Set the timers for the delay etc in cmd 41. This will allow the phone to ring on the reception phone, and if not ans, then it can ring on the other two phones.

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Entire Thread
Subject	Posted By	Posted
IVS 2000 - How do I set up a ring group for ICM calls from a door phone	cconley	03/11/05 05:31 PM
Re: IVS 2000 - How do I set up a ring group for ICM calls from a door phone	dassa	03/11/05 08:09 PM

Moderated by ttech

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems NEC Telephones & Systems IVS 2000 - How do I set up a ring group for ICM calls from a door phone