IVS 2000 - How do I set up a ring group for ICM calls from a door phone|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

IVS 2000 - How do I set up a ring group for ICM calls from a door phone #227457 03/11/05 01:31 PM
Joined: Jan 2004 Posts: 91 Hayward, CA, USA cconley OP Member
OP cconley Member Joined: Jan 2004 Posts: 91 Hayward, CA, USA	We have an old IVS 2000... We just installed an analog door phone and put it on an analog port with ext 249... works great.. set COS so that it can only make ICM calls. We want to be able to dial a number (extension, virtual number, group number) so that 2-3 stations will ring... first at Reception (200) and then delay ring at two or more other stations... all of these stations will have the ability to activate a door strike release to buzz someone in... There are times during the day when the Receptionist steps away from her desk... the other extensions don't want to hear the ringing call all of the time, just when Reception does not get it by the 3rd or 4th ring... I have poured through the manuals and can't figure it out... Please help... Craig ------------------ Craig Conley - Conley Communication Services 510-760-8128 or [email protected]

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Entire Thread
Subject	Posted By	Posted
IVS 2000 - How do I set up a ring group for ICM calls from a door phone	cconley	03/11/05 05:31 PM
Re: IVS 2000 - How do I set up a ring group for ICM calls from a door phone	dassa	03/11/05 08:09 PM

Moderated by ttech

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems NEC Telephones & Systems IVS 2000 - How do I set up a ring group for ICM calls from a door phone