|
|
Joined: Jul 2005
Posts: 32
Member
|
OP
Member
Joined: Jul 2005
Posts: 32 |
I would appreciate any help in this issue: I've got fms(8) card with 1.8 software on the flash. It's acting strange (althrough I didn't try to access it with cosessions), it boots up and after the initialization the run led is blinking (ok), mb led is steady(ok) and bclr is steady red (problem). The channel led's (total 8 of them) getting red within 2-3 minutes after the initialization starting with the channel 8. My questions are: 1. is fms(8) supported on elite 48 2. do I have to initialize the cabinet first to see a vm card? 3. could it be a problem with the board?
Any feedback is appreciated.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,299
Posts638,872
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
1 members (justbill),
116
guests, and
316
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|