|
|
Joined: Feb 2007
Posts: 2,473
Member
|
Member
Joined: Feb 2007
Posts: 2,473 |
By default NEC IPK has a Maintanance set up to 4 hours. That means if was no call made into or out of the system during 4 hours the IPK goes into reset and all phones will show "Initalizing". there are two ways to solve that problem: Reset or wait. Sometimes just one or two ports would do the same thing. Usually it is on the same ESI card. Pull the card and push it back in with power up. I noticed that most of the time it is heppaned on ESI(E), expension 8 port cause of bad crimp for the jack or cause the jack itself.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,293
Posts638,827
Members49,768
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Toner),
121
guests, and
230
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|