We recently installed 3 runs of 12 strand loose tube and I termed it all. Started the test/cert process last Friday morning and had a 100% failure rate! Yes, you read it right. We had a thousand more foot on the spool and reran it all. This time I termed 4 fibers. This to failed. I did notice some odd twists and kinks when we laid out the runs. Had another thousand foot overnighted with more connectors and finished the term process this afternoon. Had a 100% pass rate this time. The area Corning rep should here next week to inspect what we removed. I say the cable was respooled incorrectly. My termination techniques never changed. I was dancing a jig when the last pair went green. Besides, it's my birthday!