|
|
Joined: Jun 2007
Posts: 2
Member
|
OP
Member
Joined: Jun 2007
Posts: 2 |
My T1 is broken into 24 analog channels through a Zhone 10-plex with 24 FXS channels.
2 of the channels just stopped working - no dial tone.
This is a new installation where I had to supply the channelbank. Luckily, it worked with all the default settings as I could not find anyone to install it. (24 channels is a rare setup in Canada as it was disallowed until recently. It doesn't help that the Channelbank is obsolescent.)
Now this and I have no clue how to troubleshoot. All the settings I've checked are OK but I don't know if I've missed anything. Commands are via CLI which I access with Hyperterminal.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,290
Posts638,801
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
120
guests, and
387
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|