|
|
Joined: Oct 2005
Posts: 788
Member
|
OP
Member
Joined: Oct 2005
Posts: 788 |
I have (unfortunately) gotten the job to program an Adtran Total Access 608 for a hotel application. I think the programming is correct, since I interfaced with Adtran's tech support while doing it. But the service provider has me second guessing myself. He says that the signaling method is set to loop start on the T1. I think he's full of it. I know that the three ports on the Adtran that I am taking off the T1 as analog lines are loop start, but the T1 itself should be wink start, and that's what I've got my Mitel switch set at. However, when I plug in the T1 to the Adtran, and then plug in the Adtran's DXS-1 port to the T1-E1 module in the switch, I get all green lights all the way, but it does not work at all. Calls in get a ring-no-answer, and we can't even dial out anywhere. The provider says he has had a T1 going down there to the hotel for a long time, and he also says that one T1 is like any other. I say he's full of it, again. Any thoughts? By the way, the T1 provider is a company called IPC.
Phil
SCCE, TTA, CTP
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Carl Navarro),
127
guests, and
342
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|