I got your message and called you back but you were gone so I'll post it for you.
1. At station 110 press Intercom *746*
2. Press C41 on the DSS
3. Dial the station port you want to program 010 - 073 (port 010 = station 110 and so on)
4. Press C40 for Rining Line Pref
5. Press C18 then press B1=line B2=line2 B3=lin3 B4=line4 B5=line5 B6=line6 B7=line7 B8=line8 A7=line9 A14=line10 A6=line11 A13=line12 A5=line13 A12=line14 A4=line15 A11=line16 A3=line17 A10=line18 A2=line19 A9=line20 A1=line21 A8=line22 for the lines you want to ring at that station.
6. Press * Monitor or Speaker to end


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]