|
|
Joined: Sep 2004
Posts: 7
Member
|
Member
Joined: Sep 2004
Posts: 7 |
I'm the one with the Debut. Currently it is interfaced to the DSU II via an ATI-D but I cannot dial into the VM. The first question is what baud rate do I set the com port on the DSU (and then the Debut) for serial integration? This is one of the very first units Key Voice manufactured for Comdial approximately 6 years ago. I have never used it, but I recall that it was an analog system. Any help would be great. The VM need is not too sophisticated so even if all programming is not accessible via the telephone key pad, I'm sure a base level can be established?! Joe
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
1 members (nfcphoneman),
117
guests, and
425
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|