Whoops Pressed Enter too many times I’ll have another go.
I’ve not had a problem with the MGI Lead looks a bit tight but the cover has always gone on for me.
I have 3 Solutions
1. Be rough and ram the cover on you may be surprised to see it still works the connector seems to bend sideways off the PCB a bit anyway.
2. Use the Patchleads without boots on them they will stick out less. Or if you’re running cables you will be crimping a plug on the end anyway?
3. Samsung seem to have fixed this Problem with the 7200 no problems getting the cover on there
Although you seem to run into those sorts of issues with the 7200 anyway they only just fit into a 450 Deep Rack I think I drilled a hole into the wall behind for the power cord last time I did one.
