I´m trying to make a call between a OS100 and OS500. If I use SPNet
using 830X trunks everything works good, but if I try with H323 using
trunks 840X I can´t.

This are the settings.

OS500
MMC724
N-LCR : 22

MMC820
SELF: Link ID 090 IP 192.168.0.200
SYS01: Link ID 091 IP 192.168.0.151 (for the test, I have both in the
same LAN)

MMC824
01: 22 - 0912 SZ: 04 MAX: 07

MMC830
IP 192.168.0.200
MASK 255.255.255.0
GW 192.168.0.1
PRIVATE IP ONLY

MMC831
IP 192.168.0.201
MASK 255.255.255.0
GW 192.168.0.1
PRIVATE IP ONLY

MMC603
GROUP 803 MEM 8301-8308
GROUP 804 MEM 8401-8408

MMC710
091 LENGTH:06 RT:02

MMC712
RT:02 G:804

I think that´s all. Here if I dial 2201 take any 840x trunk, if I see
the SMDR I can see 091201, but in the other side I don´t recive anything.

The other side has this settings

OS100
MMC724
N-LCR : 32


MMC820
SELF: Link ID 091 IP 192.168.0.151
SYS01: Link ID 090 IP 192.168.0.200

MMC824
01: 32 - 0902 SZ: 04 MAX: 07

MMC830
IP 192.168.0.151
MASK 255.255.255.0
GW 192.168.0.1
PRIVATE IP ONLY

MMC831
IP 192.168.0.152
MASK 255.255.255.0
GW 192.168.0.1
PRIVATE IP ONLY

MMC603
GROUP 803 MEM 8301-8308
GROUP 804 MEM 8401-8408

MMC710
091 LENGTH:06 RT:02

MMC712
RT:02 G:804

Here if I dial 3201 take any 840x trunk, if I see the SMDR I can see
091201, but in the other side I don´t recive anything.

If in the MMC712 I change the group 804 and use 803, the call connect
fine.


Is there anything I am missing?

I wonder if you can help me.

Thanks

Regards