Just a thought, but if everything was fine until a couple days ago, and no changes were done to the system, perhaps its not a system issue. Have you called the telco and opened a trouble ticket?

So you say 7 digit dial for local calls still works, but you cant do 10 digit dial for mobile calls? You dont need to go through the trouble of turning LCR off, just make sure its set up to expect 10 (or however many digits you need) dialing for the mobile digit string by adding that additional 3 digits as a new entry with 10 digits expected. If you are dialing and the LCR is sending the call through to the PRI trunks prematurely, its just that one setting that needs to be changed. Everything else should be fine, you could be doing way more than necessary and over complicating this.

~ Marty

Sometimes there ARE ghosts in the machine. I use MSN Live, ask me for the addy if you want.

Never, ever, argue with an idiot. They'll drag you down to their level and beat you with experience

http://www.vernontelecom.com