Hi all
i hv huge pbx's network , all pbx's in the network is connecting using Q sig .
In this network i installed OS7200 sucessfully, & it's work using Qsig normally with two pri cards (two Qsig nodes)
The OS700 installed in the center of the network
The mapping of network is:
Node A on OS7200 (801): Is connected to single alcteal pbx have NODE ID 837
Node B on 7200 (802): Is connected to Head Quarter of company (the ID 's of nodes that conected to HQ is (80,81,702,704,605,609,..)
The customer want,any employee in OS7200 Left handset
& dial( 837 xxx) the call must route to node A
& any employee in OS7200 Left handset
& dial( 80 xxx,81 xxx,702 xxx,704 xxx,605 xxx,609 xxx) the call must route to node B
My problem the customer does not want to dial any access code before NODE ID (my friends you know to employ this configuration i need to apply LCR) .
So how i can activate the LCR without dialing any code?or if u hv any idea to solve this case ?
regards
