|
|
Joined: Nov 2008
Posts: 32
Member
|
OP
Member
Joined: Nov 2008
Posts: 32 |
Using STP cable will be a definite then.
Is there diagram for breaking out a group of T1s to separate cables?
All I am finding is just the jack pin out. RJ48X I also see that those jack pin outs have Tip and Ring reversed from the normal USOC Jacks.
So if I wanted to make this capable of 2 additional T1s With a total of 4, could I put all 4 T1's on these 2 cables going up to the suite? Again, the TXs on one cable and RXs on another, and using Shielded cable?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,299
Posts638,872
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
114
guests, and
299
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|