Originally posted by hbiss:
we'll either solder a small section of single-pair cross-cut or b-connect the cross-cut and then punch it down.
That's the only reason we keep some beanies on the truck, to splice stranded to solid so it can be cut down on a block.
-Hal
I agree with beanies for stranded to solid connections... and being that we do a lot of Valcom bullhorns, they are the perfect product for the application (also for the MOH outputs).
Not to derail the thread too far, but do they make beanies that take inputs from both sides (like a butt-splice)? I've never even thought about looking for them, until we did these
Valcom V-1422 .
