<font face="Verdana, Arial" size="2">Originally posted by nonameyet:
This is on a Medley.
There is a Major hum on ext 191 can't even use this ext, and ext 192 is getting pretty bad as well.
What I have tried...I'm dealing with ' all used ' parts. But, on Friday, I swapped out EVERYTHING but the Hard drive and it's STILL there!
How can this be?, It's a PLASTIC cabinet
Running software 7.0.0
for the sake of simplicity, it is a 1 board system... I took it apart completely at home, somebody else said something about possibly a component was shorting out on the case.. I have it ' splayed ' all over my wood workbench,, It still has a Major Hum on ext 191.. all the Digital ports work just fine.
ANYBODY?
</font>
Check the amphenol connection on the esi. sometimes one of the amphenol pins get bent. Otherwise, if this is for a customer sell him a new one. They are only $695 for the c-class.
I had a problem like this before but it was a line port. The actual problem was with the lines not the system. Even though morons a BellSouth "ran a stupid and idiotic test on the lines" that showed that everything was OK. When I went out to the site I found out that I got the same noise on the RJ21X. Actually they had crossed two lines on the pole since on an incoming call the phone would ring intermittantly.
A blind two year old on crutches could have figured that out.
[This message has been edited by petratech (edited May 12, 2005).]
