|
|
Joined: Aug 2011
Posts: 2
Member
|
OP
Member
Joined: Aug 2011
Posts: 2 |
Hello all - My first post. I am a certified IWATSU Technician, however my company dropped our IWATSU dealership back in 08'. Needless to say we have legacy customers around so this forum looks great.
QUESTION : I installed a DTI-T Pri card in an ECS 5.0 last week. Calling in works perfect, calling out is a problem, when you initiate the call it goes to dead air then drops, it lets you dial the digits then just dies.
What I know is correct.
The card is installed in the last physical slot. I have no errors on the smart jack, it shows up correctly in Hardware and I have optimized routing or Trunks configured correctly. Seems I'm just missing something. Any ideas?
FYI I did verify PRI is functioning correctly.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,291
Posts638,809
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|