|
|
Joined: Aug 2005
Posts: 7
Member
|
OP
Member
Joined: Aug 2005
Posts: 7 |
I still have to try to isolate exactly which component(S) have failed in an older Prostar816 Plus. No matter which phone is on the end of which line... or if there's only one phone, and everything else disconnected except the incoming CO lines... the "HOLD" function fouls up 3 of the 4 incoming CO lines. With (or without) a caller on line... press the "HOLD" button... and lines 1,2,3,4 will be unavailable for several seconds. Line 5 seems unaffected. Usually. The longer you spend pushing CO line buttons... the longer it takes to recover. Best bet if you forget and hit "HOLD" is to just sit and wait for about 20 seconds. (If you had a caller, the line is dropped. They hear "click"... and then they're gone.)
I've played all the moving phones around stuff, disconnected everything, reset and reinitialized and re-entered all the programming I can several time to no avail. The only manual I have is the blue 82-page Installation Manual. Which seems about useless from this point on.
It sound to me like a problem on board somewhere, but I have no idea at all how to chase it down any farther.
Halp! (ref the question "Fried Chips" on the other Sundance BB under Samsung for a few more details.) Jason
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,299
Posts638,875
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
95
guests, and
308
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|