We are having a devil of a time getting our
old MultiTech MT2834ZDX modems to communicate
with the VeriFone/Nurit terminals in the field.

At 1200baud, we think they should behave.
Instead, we are getting garbage on the line and
dropped transactions.

Our lines at our new location are supplied by
AT&T and they are also stumped as to the problem.
The line current is fine at 25.6 milliamps, they
have checked the polarity, but the comm
remains an "iffy" thing.

We had this problem before we move about two years
ago when the CO installed a new switch. We finally
figured out that if the lines were provisioned as
"fax modem" they started to work.

Here, we are all fiber up to a Litespan remote
terminal (allegedly). The network manager (AT&T)
say there is no way to provision the lines
differently and is stumped.

Help!

1. Can this remote terminal be configured in such
a way to communicate with our old modems?

2. If this is NOT the culprit, what else should
we be checking?

Thanks!


_|_| Jay Honeycutt
_|_| TimeSlicer, Inc.