|
|
Joined: Nov 2011
Posts: 3
Member
|
OP
Member
Joined: Nov 2011
Posts: 3 |
Hello, new to the forum. We currently have a Valcom V-2006A paging system hooked up to Cisco Unity/Subscriber/Publisher going through a Cisco 2811. We are moving over to a VOIP phone system by CudaTel. We have purchased a Cisco SPA-3102 to connect from the CudaTel to the Valcom using the FXS port.
I'm not sure if anyone on the board has worked with the CudaTel system before and tried interfacing with a similar paging system. The CudaTel sees the FXS port as a provider port and requires a line number. As far as I can tell the RJ11 goes directly from the patch panel to the Valcom and would not have a phone number associated to it.
I am not versed in the warranty Valcom provides for their products so along with posting here I have also sent Valcom support an email describing the situation. I am also actively working with CudaTel support to figure this out.
Any help or suggestions provided would be greatly appreciated.
Thank you.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,262
Posts638,694
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
2 members (teleco, BobRobert),
108
guests, and
249
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|