|
|
Joined: Feb 2005
Posts: 12,344 Likes: 3
Member
|
Member
Joined: Feb 2005
Posts: 12,344 Likes: 3 |
Customer has added a 4 story building to existing 3 story bld....
I assume these buildings are attached to each other?
Would it be ok to pick up the audio in the old building,at the old amp, run it to the new 50 w amp, which would feed only the new ceiling speakers. I may need to add another amp on another floor if they add more speakers...
Unless there is some compelling reason to use multiple amplifiers such as zone paging, that would be one hell of a Rube Goldberg setup. How many speakers and what kind are we talking about here? I certainly hope that this is a 70.7 volt system and dispite what others may say I never recommend supplying the input of an amplifier with the speaker output of another. It's really not good practice.
From what you are saying all you should have to do is replace the existing amp with one of suitable power to supply all speakers as well as those anticipated in the future. Power is cheap.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,296
Posts638,846
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
137
guests, and
268
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|