I have a used IP 320 I am setting up, all is pretty much done, except the following - I am in Dallas, and everything is 10 digit dialing, local calls etc....I have 3 lines, line 1 and 2 automatically dials a 1 first, line 3 does not. So line 3 works fine, but lines 1 and 2, all calls (except long distance) you get the message it is not neccessary to dial and 1 first, etc...I can't find where in the programming to stop this. I am programming from the phone, prg *#, etc..
Thanks for any help
