|
|
|
|
Joined: Aug 2012
Posts: 3
Member
|
|
Member
Joined: Aug 2012
Posts: 3 |
Does anyone have a successful music on hold solution for a 7100? (We also have a 7400)
I'm looking for an external player. From what I know so far, I'm going to have to terminate the audio cable into an RJ45 head fpr the MISC port. I've created this cable and just tried to test it quickly (with music on my cell phone) and it wouldn't work. I ran through all the options on the "IT TOOL" that relate to MOH.
Just curious to see what other's have found to work.
*edited for a typo in the title
Last edited by ddunaway; 08/16/12 04:36 PM.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
You made the cable and without going to my manual I think it is the most middle pair, pins 4+5 but I could be wrong.
So you can take that to whatever music source you want with just a little soldering to a Radio Shack 1/8" male mono plug or buy a pre-made cable for a buck or two that has a solid copper end and bean it together. That will fit into an iPod, a radio, an MP3 player or whatever.
OR, get an RCA end and plug that into some source with an RCA output, just remember that the volume control has to be the music source not the 7100.
DO NOT play the music source too loud, the 7100 will limit the volume and the music will sound horrid. That will be your fault. Start by l o w volume and work your way up.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
Don't forget to program MMC408 for MOH and also 308 if you want background music.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Aug 2012
Posts: 3
Member
|
|
Member
Joined: Aug 2012
Posts: 3 |
OK. After I get that done, where it currently says "TONE" in the images below, what does it need to say? Perhaps I'm inept, but I haven't seen any mention of TONE in the manuals. 2.4.2 3.2.2
|
|
|
|
|
Joined: Jun 2007
Posts: 115
Member
|
|
Member
Joined: Jun 2007
Posts: 115 |
408 / 308/309 must be 371
861 MOH set to external
|
|
|
|
Forums84
Topics94,526
Posts640,016
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
106
guests, and
63
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
