|
|
Joined: Nov 2012
Posts: 5
Member
|
OP
Member
Joined: Nov 2012
Posts: 5 |
Im having difficulties with AA menus not doing what I expected them to do. I have created a CCR tree that consists of a Home Menu node followed by a menu node with transfer nodes following that. When I call in I get the AA picking up on the second ring as it should and I hear the message I set on the Home menu. The second menu in the series I expected to offer me the ability to make a selection and trigger the transfer node that corresponds to the digit I hit. However when I press 1 after hearing the prompt for the second menu the system attempts to transfer me to the operator and then I get a message saying the operator is not available. Im an A+/Net+ tech not a phone guy and I'm lost as all get out at this point. Please help!
Additional info: In the Greeting table I have picked out the attendant extention I used is the same as the voicemail attendant. Custom AA menu prompts is enabled and the primary greeting is recorded. The menu repeat key is set to 8.
AA properties are Return to AA not selected Touchtone gate none use customized digets not enabled starting CCR tree feature code is 911 ( only 1 table and telling it to start at the top I think) Number of CCR tree featuers is 8 And repeat CCR tree is selected
Last edited by et2eric; 11/21/12 12:10 PM.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,290
Posts638,802
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
137
guests, and
394
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|