|
|
Joined: May 2010
Posts: 21
Member
|
OP
Member
Joined: May 2010
Posts: 21 |
Ok, have booted the system up will all cards pulled except the processor and the first pdku. The keysets close by show no display but a few others show an extension number upon a button press. I did not check other keysets earlier so i reseated all the boards and powered up again with the same results. Some keysets no display, others with after a button press. Keysets with working displays have no dial tone and no trunck access. I am assuming the programming was lost. I did check the battery jumper and it was set to off, so i set it to on.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,306
Posts638,894
Members49,771
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
74
guests, and
30
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|