the PZ-VM21 does not show up on the CD-CP00. only the PZ-ME50 and the PZ-IPLA/B do. in the version information you will see if it is installed yes or no.
what you could try is to run the script to activate the inMail.
you need to make a download with PCpro. go to Tools -> Scripts. there you open the directory and go to the directory VM q&1 login (all ports). here you choose the file that suites your situation, with or without ME50. upload the changes and reset the SV8100.
hope this helps.
I tried the running the VB script "VM script.pcs" as you suggested dutchy but it generates the following errors in the log file:
ERROR (file VM script.pcs, line 67) : SET 16-02 pos=(63-00-00) val="65"
ERROR (file VM script.pcs, line 68) : SET 16-02 pos=(64-00-00) val="66"
ERROR (file VM script.pcs, line 69) : SET 16-02 pos=(65-00-00) val="67"
ERROR (file VM script.pcs, line 70) : SET 16-02 pos=(66-00-00) val="68"
ERROR (file VM script.pcs, line 71) : SET 16-02 pos=(67-00-00) val="69"
ERROR (file VM script.pcs, line 72) : SET 16-02 pos=(68-00-00) val="70"
ERROR (file VM script.pcs, line 73) : SET 16-02 pos=(69-00-00) val="71"
ERROR (file VM script.pcs, line 74) : SET 16-02 pos=(70-00-00) val="72"
ERROR (file VM script.pcs, line 75) : SET 16-02 pos=(71-00-00) val="73"
Do you know what the errors mean? They are obviously being generated even before uploading which I think would suggest an error in the script file, or I am my mistaken?
Thank You
