|
|
Joined: Jun 2007
Posts: 81
Member
|
OP
Member
Joined: Jun 2007
Posts: 81 |
We recently needed to replace an existing STS cabinet with a loaner STS cabinet. The original cabinet needed to be sent in for repairs to the SLT ports.
The loaner cabinet was initialized and the database from the original system was uploaded. The system was installed and everything seems to be working fine except for the outbound caller-ID number. There are two companies sharing a PRI and certain stations are supposed to send out one phone number while other stations send out a difference number. I have set the station programming correctly and this worked fine in the original system. However, despite the fact that each station is set with the correct outbound caller id number all calls are coming up with the one companies main number. Is there another setting I don't know about that would impact this? I cannot find anything else to change. Any help would be appreciated!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,287
Posts638,793
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
2 members (Bob3470, justbill),
120
guests, and
388
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|