|
|
Joined: Sep 2013
Posts: 3
Member
|
OP
Member
Joined: Sep 2013
Posts: 3 |
I have a Infinite DVX Plus Mach I and a 7480-00 Caller ID interface unit. I am trying to get the two to communicate to each other however I was not sure if there is a way to test the Caller ID to determine if it is communicating with the phone system. Is there a special RS-232 cable that I should be using? I can’t determine the correct pin assignments for the Mach I. I have looked in various install manuals and other areas. I have the pin assignments for the Caller ID. In the system programing I have the Caller ID enabled, baud 9600, SIU1, and have changed the ring delay timer to 04. The dip switches on the MISB are all off (down). The dip switches on the CID are all on (down) for 9600 baud. Is there something I am missing?
Thank you in advance.
-BJ
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,287
Posts638,784
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
2 members (MooreTel, BobRobert),
125
guests, and
177
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|