KX-TA308 SMDR randomly shows C-01 in ext. field and CID field is blank|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Re: KX-TA308 SMDR randomly shows C-01 in ext. field and CID field is blank M.E. John #568213 03/13/14 02:23 PM
Joined: Aug 2012 Posts: 3 Central Jersey M.E. John OP Member
OP M.E. John Member Joined: Aug 2012 Posts: 3 Central Jersey	Upon closer examination, it appears to occur after every completed call, inbound or outbound. So I am thinking it might be the Message Waiting signal being sent from the CM. (I do subscribe to Local Carrier Based Voice Mail from Optimum, and it does set the MW lamp correctly). Any thoughts? John John the Mechanical Engineer - Telephone Technology Dilettante since 1986 "Those who sacrifice security or reliability for convenience, deserve none of the above"

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Entire Thread
Subject	Posted By	Posted
KX-TA308 SMDR randomly shows C-01 in ext. field and CID field is blank	M.E. John	03/12/14 05:59 PM
Re: KX-TA308 SMDR randomly shows C-01 in ext. field and CID field is blank	ShawnC	03/13/14 04:11 PM
Re: KX-TA308 SMDR randomly shows C-01 in ext. field and CID field is blank	M.E. John	03/13/14 06:23 PM

Moderated by Carl Navarro, OBT

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems KX-TA308 SMDR randomly shows C-01 in ext. field and CID field is blank