Helllo World.....

I try to configure a sip trunk between Asterisk and NEC SL1000.

My setup is ok from asterisk ---> NEC
I can call extensions from asterisk ( 400-499) ----> NEC ( 100--300).
I setup the incoming trunk like DIL on NEC.

The problem is when i try to call back some extensions from Asterisk via 26-02 Route to Trunk Group ( my trunk group 3)
So if i dial 9 and 4xx the sip trunk is selected.

so my setup is like this :

1. prg 10-40-01 - active
2. prg 10-40-02 - sip trunk port : 4
3. prg 10-28-04 : username : 400 is this correct ?
4. prg10
5. prg 14-05 Trunk 9~12 group 3 Priority 9-12
6. prg 14-11 Trunk 9~12 ID 1-4
7. prg 14-12 Trunk 9~12 Register id -1 Pilot register ID 1
8. prg 14-01 Trunk 9~12 --- > need to put something here ?!
9. prg 10-29 .? need to make something here ?!
10. prg 10-30 user 400 pass 400 ----same on peer details asterisk
11.prg 10-36 user id 400 authid 400 pass 400 same on incoming asterisk


Anybody have idea about what the missing config for the sip Trunking ?!