MICS and flashing MWI on incoming calls|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

MICS and flashing MWI on incoming calls #573438 06/19/14 09:03 PM
Joined: Oct 2005 Posts: 612 Likes: 1 Chattanooga BobRobert OP Member
OP BobRobert Member Joined: Oct 2005 Posts: 612 Likes: 1 Chattanooga	Can I stop the MWI from flashing on an incoming call even though it is programmed as appear only? I failed to get the software version, but they are using 7316 phones. TIA, BobRobert

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Entire Thread
Subject	Posted By	Posted
MICS and flashing MWI on incoming calls	BobRobert	06/20/14 01:03 AM
Re: MICS and flashing MWI on incoming calls	NTlayoff	06/20/14 01:26 AM
Re: MICS and flashing MWI on incoming calls	BobRobert	06/20/14 01:56 AM

Moderated by MooreTel

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems MICS and flashing MWI on incoming calls