|
|
Joined: Jan 2011
Posts: 81
Member
|
OP
Member
Joined: Jan 2011
Posts: 81 |
ULDs stay out of service (solid red LED) when the TVSe+ is seated. When the TVSe+ is unseated, the ULDs come back on (blinking red LED). I am under the 128 port limit. What is also odd is if I seat another ULD (staying under the 128 port limit still) the ULD cards go solid red on the LEDs and then eventually start blinking again and come back on.
I tried moving the TVSe+ to different slots, same with the ULDs, but the same issue occurs. The first 3 slots of the cabinet are used by an IPEX2 with a 4 CO daughter card. All of the firmware is updated and software versions are correct. Just perplexing on why the system is doing this.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,296
Posts638,852
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
2 members (justbill, Yoda),
120
guests, and
275
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|