Good evening, Gentlemen:
I am posting here for maximum exposure.
For a particular specialized application, I need to acquire about (six) 66-M-50 terminal blocks.
The ones I need are the older style, which were made up until a few years ago. They are about 1/4 inch deeper than the newer ones that are marketed as "Cat5e". When compared side-to-side with the newer version, the difference in thickness of the body is obvious. In fact,you may already be aware of this size difference, when you went to install additional blocks next to older ones, and said "WTF?" The new ones do not stick out from the wall as far, in other words.
I can use new or used blocks of this type. They can have writing on them or broken fanning strips. Condition is not important as long as all the pins are present and not severely bent. I will be removing the pins, in fact, to use in different blocks.
I am willing to pay the equivalent money that new ones would cost, plus shipping charges. Would you check your junk piles and top shelves for these? Thank you!
Arthur P. Bloom
631 - 749 - 0100 POTS
866 - 749 - 0100 WATS
1 + 749 - 0100 C*NET
