Going from T-1 to Pri|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Going from T-1 to Pri #577463 09/14/14 11:47 PM
Joined: Mar 2001 Posts: 3,869 Los Angeles, CA Old blond hippity hopping Bunnie OP Member
OP Old blond hippity hopping Bunnie Member Joined: Mar 2001 Posts: 3,869 Los Angeles, CA	I'm guessing I don't need to disable the cards to go from T-1 to Pri as I would do if going from loop start. Is that correct? I have the regular pri setup, does anyone have a quick cheat sheet to go from T-1 to PRi, have to do this during the day and would like to be down as short as possible. You could email to bunniemeyer at gmail.com Thanks, Bracha THE Bracha, old blond specialist in Rube Goldberg solutions.

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Entire Thread
Subject	Posted By	Posted
Going from T-1 to Pri	Old blond hippity hopping Bunnie	09/15/14 03:47 AM
Re: Going from T-1 to Pri	BTS01	09/15/14 03:17 PM

Moderated by MooreTel

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Going from T-1 to Pri