I have read the Inter-Tel Phone Tips dated Sep. 26, 2006 about the 10 digit dialing settings. My system was set to the description. However, I can not make a call to specific numbers in the 2nd area code. These numbers are in the same latta as we are and thus the problem. Numbers outside the latta with the second area code operate fine, inside I can't dial them The phone service we use sees the numbers we dial passing through. They have sucessfully dialed the numbers from there location. They told me to use only 10 digits that the 1 wasn't needed. This does not work for us.
We are using Inter-Tel 8.0002 software.
The Home Area Codes are 803, 843.
The Area Flags are set to: Yes, Yes, No, No, Yes. I did however change it to YYYNY without luck.
Our lines come in over a T1, through a gateway router and broken out into 7 lines. There is no T1 card in the box.
What else do I need to do to accomplish this?
Thank you for any help
