|
|
|
|
Joined: Jul 2014
Posts: 33 Likes: 1
Member
|
OP
Member
Joined: Jul 2014
Posts: 33 Likes: 1 |
So... I've got 2 dk's with piou, I can get smdr info out of the lower port on both of them, and one of them I can get a CODE and MODE prompt out of (which I can then do what I want with) but the other... just sits there when I plug into the supposed TTY port. the switch is set to tty not modem, there's no modem on the card to get in the way... it's not the card, because I can put either card in the system that'll talk to me and they both work... The newer system has a much newer (relatively) processor, so... did the remote/local tty procedures change somewhere between a rctua1 and an rctua4? on the 1, i can talk to the switch, on the 4... it's like there's nothing there.. thanks for any enlightenment.  skunky
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,294
Posts638,835
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
155
guests, and
333
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
