We have a customer who uses a Cisco small business switch to power his PoE IP phones. That is its only purpose. The switch pulled an IP address from his network server and all is well, except we need to know the IP address the Cisco switch is using. We have access via the console port, but can't find a command to use to display the address the switch has taken. We really, really don't want to default this switch and start from scratch. Does anyone know the CLI command to show the IP address? Common sense would say something with the 'show' command would work, but we can't find anything in the documentation.

Thanks.

Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.