|
|
Joined: Jan 2005
Posts: 33
Member
|
OP
Member
Joined: Jan 2005
Posts: 33 |
I have a Hotel system installed for my customer with an SX 200 el--When a room (analog port) calls the front desk 0 the console which is on digital port 1 can hear the room and the room can hear the c onsole--but when a room calls 0 and the front desk uses the digital side phone 4025 they can not be heard--same for any of the 3 remaining digital 4025 sets--the sets are on ports 2,3,4 of the same card the console is on
I have tried to analize the trouble by swapping the fiber cards from one cabinet to another and it does not help--I tried the call from a different station in a differant cab and still no good--
I established a call that was bad room to front desk and left it off hook then thried another room and the call was ok can hear thatv told me that an intercom path was bad but can I busy the path out ?? that is my delema--is so how do I do it--
Thanks for any help you can give me
wayne
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
2 members (Toner, hitechcomm),
142
guests, and
241
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|