sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems IP Office 406 compatibility

Print Thread

Rate Thread

IP Office 406 compatibility #602005 06/30/16 04:27 PM
Joined: Jan 2009 Posts: 854 Likes: 1 Nebraska ffej010 Member
ffej010 Member Joined: Jan 2009 Posts: 854 Likes: 1 Nebraska	I have a customer that has multiple IPO 406 units, all at Rel 4.1 (15). One of the units has multiple DS ports that are bad and was wondering if he could just have me swap out the unit. I have a 406 on hand that is at Rel 4.2 (14). Will this be compatible with the 4.1 (15) units? I'm hoping so, as I don't think I have a copy of 4.1 (15) firmware around.

Avaya IP Office Help & Support Website

Avaya IP Office Help & Support Website

FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Re: IP Office 406 compatibility ffej010 #602012 06/30/16 08:42 PM
Joined: May 2002 Posts: 4,314 Likes: 8 ROSEDALE hitechcomm Moderator-Avaya, Polycom
hitechcomm Moderator-Avaya, Polycom Joined: May 2002 Posts: 4,314 Likes: 8 ROSEDALE	Are you reprogramming or saving conf and uploading www.iSimply1.com

Re: IP Office 406 compatibility ffej010 #602016 07/01/16 12:54 AM
Joined: Jan 2009 Posts: 854 Likes: 1 Nebraska ffej010 Member
ffej010 Member Joined: Jan 2009 Posts: 854 Likes: 1 Nebraska	Uploading existing configuration.

Re: IP Office 406 compatibility ffej010 #602039 07/02/16 10:18 AM
Joined: May 2002 Posts: 4,314 Likes: 8 ROSEDALE hitechcomm Moderator-Avaya, Polycom
hitechcomm Moderator-Avaya, Polycom Joined: May 2002 Posts: 4,314 Likes: 8 ROSEDALE	Your working with very old stuff. I would upgrade to 500 V2. Support on equipment that old is hard to find. It's not supported anymore. Good luck www.iSimply1.com

Re: IP Office 406 compatibility ffej010 #602040 07/02/16 10:19 AM
Joined: May 2002 Posts: 4,314 Likes: 8 ROSEDALE hitechcomm Moderator-Avaya, Polycom
hitechcomm Moderator-Avaya, Polycom Joined: May 2002 Posts: 4,314 Likes: 8 ROSEDALE	BTW. Did you change the DS card? www.iSimply1.com

Re: IP Office 406 compatibility ffej010 #602064 07/03/16 09:02 PM
Joined: Jan 2009 Posts: 854 Likes: 1 Nebraska ffej010 Member
ffej010 Member Joined: Jan 2009 Posts: 854 Likes: 1 Nebraska	Tried talking the customer into upgrading, but if they do then they won't be able to network this site to their other locations, as all are running on 406's. Beings I have a 406 lying around, he agreed to buy it off me and I'd install it. Next budget cycle, they are going to plan to replace all their 406's with 500v2 units. Basically this is just to get them going. BTW, pretty sure the DS card isn't changeable on the 406. Isn't it just integrated into the chassis?

Re: IP Office 406 compatibility ffej010 #602071 07/03/16 10:58 PM
Joined: May 2002 Posts: 4,314 Likes: 8 ROSEDALE hitechcomm Moderator-Avaya, Polycom
hitechcomm Moderator-Avaya, Polycom Joined: May 2002 Posts: 4,314 Likes: 8 ROSEDALE	Not sure, but I don't think so www.iSimply1.com

Hop To

Link Copied to Clipboard

Admin Program for XTS Systems
by EV607797 - 07/11/25 10:22 AM

Tone / Probe repair
by jsaad - 07/02/25 03:49 PM

Forum Statistics

Forums84

Topics94,564

Posts640,172

Members49,868

Most Online5,661
May 23rd, 2018